Ataxx: Difference between revisions
From PLD Archive
More actions
No edit summary |
|||
| Line 1: | Line 1: | ||
== PCB == | == PCB == | ||
<gallery> | <gallery> | ||
File:Ataxx PCB.jpg | File:Ataxx JAMMA adapter.jpg|Factory JAMMA adapter | ||
File:Ataxx PCB.jpg|PCB | |||
</gallery> | </gallery> | ||
| Line 117: | Line 118: | ||
| | | | ||
|[[File:Ataxx 02-23-01.jpg|100px]] | |[[File:Ataxx 02-23-01.jpg|100px]] | ||
|} | |||
=== Factory JAMMA Adapter === | |||
{{PLD_ALL}} | |||
|- | |||
|Bruteforced | |||
|[[GAL16V8]] | |||
|U3 | |||
|[[02-28-01]] | |||
|Tested | |||
|[[DogP]] | |||
|[[DogP]] | |||
|{{PLD|Leland_02-28-01.zip}} | |||
| | |||
|} | |} | ||
| Line 165: | Line 180: | ||
<pre> | <pre> | ||
Note: To use the joystick PALs on Ataxx, the ROM must support it (Rev 5 does, Rev 1 doesn't, others are untested), and the Ataxx edge connector pin 'Y' | Note: To use the joystick PALs on Ataxx, the ROM must support it (Rev 5 does, Rev 1 doesn't, others are untested), and the Ataxx edge connector pin 'Y' | ||
must be connected to GND. | must be connected to GND. DogP has confirmed the factory JAMMA adapter has this pin connected to GND via a 0 ohm resistor (see picture) | ||
</pre> | </pre> | ||
Revision as of 12:25, 25 January 2025
PCB
-
Factory JAMMA adapter -
PCB
PLD's
Common
| PLD Information | Credits | Download | View | |||||
|---|---|---|---|---|---|---|---|---|
| Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
| Undumped | U72 | 02-01-02 | 
| |||||
| Undumped | U71 | 02-02-01 | 
| |||||
| Undumped | U85 | 02-03-01 | 
| |||||
| Undumped | U90 | 02-12-01 | 
| |||||
| Bruteforced | GAL16V8 | U68 | 02-13-01 | Tested | DogP | DogP | ZIP | 
|
| Undumped | U39 | 02-15-01 | 
| |||||
| Undumped | U40 | 02-16-01 | 
| |||||
| Undumped | U67 | 02-20-01 | 
| |||||
| Bruteforced | GAL16V8 | U91 | 02-21-01 | Tested | DogP | DogP | ZIP | 
|
| Undumped | U106 | 02-22-01 | 
| |||||
| Undumped | U6 | 02-23-01 | 
| |||||
Factory JAMMA Adapter
| PLD Information | Credits | Download | View | |||||
|---|---|---|---|---|---|---|---|---|
| Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
| Bruteforced | GAL16V8 | U3 | 02-28-01 | Tested | DogP | DogP | ZIP | |
Joystick Version
| PLD Information | Credits | Download | View | |||||
|---|---|---|---|---|---|---|---|---|
| Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
| Bruteforced | GAL16V8 | U75 | 02-24-01 | Tested | DogP | DogP | ZIP | 
|
| Bruteforced | GAL16V8 | U76 | 02-25-01 | Tested | DogP | DogP | ZIP | 
|
| Bruteforced | GAL16V8 | U77 | 02-26-01 | Tested | DogP | DogP | ZIP | 
|
| Bruteforced | GAL16V8 | U78 | 02-27-01 | Tested | DogP | DogP | ZIP | 
|
Note: To use the joystick PALs on Ataxx, the ROM must support it (Rev 5 does, Rev 1 doesn't, others are untested), and the Ataxx edge connector pin 'Y' must be connected to GND. DogP has confirmed the factory JAMMA adapter has this pin connected to GND via a 0 ohm resistor (see picture)
Trackball Version
| PLD Information | Credits | Download | View | |||||
|---|---|---|---|---|---|---|---|---|
| Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
| Recreated | GAL16V8 | U75 | 02-08-01 | Tested | DogP | DogP | ZIP | 
|
| Recreated | GAL16V8 | U76 | 02-09-01 | Tested | DogP | DogP | ZIP |
|
| Recreated | GAL16V8 | U77 | 02-10-01 | Tested | DogP | DogP | ZIP |
|
| Recreated | GAL16V8 | U78 | 02-11-01 | Tested | DogP | DogP | ZIP |
|
Note: To use the trackball PALs on Ataxx, the Ataxx edge connector pin 'Y' must NOT be connected to GND, at least when using the newer ROM revision(s). The factory JAMMA adapter likely has this pin connected to GND for use with the joystick PALs.