Ataxx: Difference between revisions
From PLD Archive
More actions
Created page with "== PCB == <gallery> File:Ataxx PCB.jpg </gallery> == PLD's == {{PLD_ALL}} |- |Undumped |U72 |02-01-02 | | | | |100px |- |Undumped |U71 |02-02-01 | | | | |100px |- |Undumped |U85 |02-03-01 | | | | |100px |- |Undumped |U90 |02-12-01 | | | | |100px |- |Undumped |U68 |02-13-01 | | | | |100px |- |Undumped |U39 |02-15-01 | | | | |File:A..." |
No edit summary |
||
(6 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
== PCB == | == PCB == | ||
<gallery> | <gallery> | ||
File:Ataxx PCB.jpg | File:Ataxx JAMMA adapter.jpg|Factory JAMMA adapter | ||
File:Ataxx PCB.jpg|PCB | |||
</gallery> | </gallery> | ||
== PLD's == | == PLD's == | ||
=== Common === | |||
{{PLD_ALL}} | {{PLD_ALL}} | ||
|- | |- | ||
|Undumped | |Undumped | ||
| | |||
|U72 | |U72 | ||
|02-01-02 | |[[02-01-02]] | ||
| | | | ||
| | | | ||
Line 17: | Line 20: | ||
|- | |- | ||
|Undumped | |Undumped | ||
| | |||
|U71 | |U71 | ||
|02-02-01 | |[[02-02-01]] | ||
| | | | ||
| | | | ||
Line 26: | Line 30: | ||
|- | |- | ||
|Undumped | |Undumped | ||
| | |||
|U85 | |U85 | ||
|02-03-01 | |[[02-03-01]] | ||
| | | | ||
| | | | ||
Line 35: | Line 40: | ||
|- | |- | ||
|Undumped | |Undumped | ||
| | |||
|U90 | |U90 | ||
|02-12-01 | |[[02-12-01]] | ||
| | | | ||
| | | | ||
Line 43: | Line 49: | ||
|[[File:Ataxx 02-12-01.jpg|100px]] | |[[File:Ataxx 02-12-01.jpg|100px]] | ||
|- | |- | ||
| | |Bruteforced | ||
|[[GAL16V8]] | |||
|U68 | |U68 | ||
|02-13-01 | |[[02-13-01]] | ||
| | |Tested | ||
| | |[[DogP]] | ||
| | |[[DogP]] | ||
| | |{{PLD|Ataxx_02-13-01.zip}} | ||
|[[File:Ataxx 02-13-01.jpg|100px]] | |[[File:Ataxx 02-13-01.jpg|100px]] | ||
|- | |- | ||
|Undumped | |Undumped | ||
| | |||
|U39 | |U39 | ||
|02-15-01 | |[[02-15-01]] | ||
| | | | ||
| | | | ||
Line 62: | Line 70: | ||
|- | |- | ||
|Undumped | |Undumped | ||
| | |||
|U40 | |U40 | ||
|02-16-01 | |[[02-16-01]] | ||
| | | | ||
| | | | ||
Line 71: | Line 80: | ||
|- | |- | ||
|Undumped | |Undumped | ||
| | |||
|U67 | |U67 | ||
|02-20-01 | |[[02-20-01]] | ||
| | | | ||
| | | | ||
Line 79: | Line 89: | ||
|[[File:Ataxx 02-20-01.jpg|100px]] | |[[File:Ataxx 02-20-01.jpg|100px]] | ||
|- | |- | ||
| | |Bruteforced | ||
|[[GAL16V8]] | |||
|U91 | |U91 | ||
|02-21-01 | |[[02-21-01]] | ||
| | |Tested | ||
| | |[[DogP]] | ||
| | |[[DogP]] | ||
| | |{{PLD|Ataxx_02-21-01.zip}} | ||
|[[File:Ataxx 02-21-01.jpg|100px]] | |[[File:Ataxx 02-21-01.jpg|100px]] | ||
|- | |- | ||
|Undumped | |Undumped | ||
| | |||
|U106 | |U106 | ||
|02-22-01 | |[[02-22-01]] | ||
| | | | ||
| | | | ||
Line 98: | Line 110: | ||
|- | |- | ||
|Undumped | |Undumped | ||
| | |||
|U6 | |U6 | ||
|02-23-01 | |[[02-23-01]] | ||
| | | | ||
| | | | ||
Line 105: | Line 118: | ||
| | | | ||
|[[File:Ataxx 02-23-01.jpg|100px]] | |[[File:Ataxx 02-23-01.jpg|100px]] | ||
|} | |||
=== Factory JAMMA Adapter === | |||
{{PLD_ALL}} | |||
|- | |- | ||
| | |Recreated | ||
|[[GAL16V8]] | |||
|U3 | |||
|[[02-28-01]] | |||
|Tested | |||
|[[DogP]] | |||
|[[DogP]] | |||
|{{PLD|Leland_02-28-01.zip}} | |||
| | |||
|} | |||
=== Joystick Version === | |||
{{PLD_ALL}} | |||
|- | |||
|Bruteforced | |||
|[[GAL16V8]] | |||
|U75 | |U75 | ||
|02-24-01 | |[[02-24-01]] | ||
| | |Tested | ||
| | |[[DogP]] | ||
| | |[[DogP]] | ||
| | |{{PLD|Ataxx_U75.zip}} | ||
|[[File:Ataxx 02-24-01.jpg|100px]] | |[[File:Ataxx 02-24-01.jpg|100px]] | ||
|- | |- | ||
| | |Bruteforced | ||
|[[GAL16V8]] | |||
|U76 | |U76 | ||
|02-25-01 | |[[02-25-01]] | ||
| | |Tested | ||
| | |[[DogP]] | ||
| | |[[DogP]] | ||
| | |{{PLD|Ataxx_u76.zip}} | ||
|[[File:Ataxx 02-25-01.jpg|100px]] | |[[File:Ataxx 02-25-01.jpg|100px]] | ||
|- | |- | ||
| | |Bruteforced | ||
|[[GAL16V8]] | |||
|U77 | |U77 | ||
|02-26-01 | |[[02-26-01]] | ||
| | |Tested | ||
| | |[[DogP]] | ||
| | |[[DogP]] | ||
| | |{{PLD|Ataxx_u77.zip}} | ||
|[[File:Ataxx 02-26-01.jpg|100px]] | |[[File:Ataxx 02-26-01.jpg|100px]] | ||
|- | |- | ||
| | |Bruteforced | ||
|[[GAL16V8]] | |||
|U78 | |U78 | ||
|02-27-01 | |[[02-27-01]] | ||
| | |Tested | ||
| | |[[DogP]] | ||
| | |[[DogP]] | ||
| | |{{PLD|Ataxx_u78.zip}} | ||
|[[File:Ataxx 02-27-01.jpg|100px]] | |[[File:Ataxx 02-27-01.jpg|100px]] | ||
|} | |} | ||
== | <pre> | ||
Note: To use the joystick PALs on Ataxx, the ROM must support it (Rev 5 does, Rev 1 doesn't, others are untested), and the Ataxx edge connector pin 'Y' | |||
must be connected to GND. DogP has confirmed the factory JAMMA adapter has this pin connected to GND via a 0 ohm resistor (see picture) | |||
</pre> | |||
=== Trackball Version === | |||
{{PLD_ALL}} | |||
|- | |||
|Recreated | |||
|[[GAL16V8]] | |||
|U75 | |||
|[[02-08-01]] | |||
|Tested | |||
|[[DogP]] | |||
|[[DogP]] | |||
|{{PLD|Ataxx_U75.zip}} | |||
|[[File:Trackball pals.jpg|100px]] | |||
|- | |||
|Recreated | |||
|[[GAL16V8]] | |||
|U76 | |||
|[[02-09-01]] | |||
|Tested | |||
|[[DogP]] | |||
|[[DogP]] | |||
|{{PLD|Ataxx_u76.zip}} | |||
|[[File:Trackball pals.jpg|100px]] | |||
|- | |||
|Recreated | |||
|[[GAL16V8]] | |||
|U77 | |||
|[[02-10-01]] | |||
|Tested | |||
|[[DogP]] | |||
|[[DogP]] | |||
|{{PLD|Ataxx_u77.zip}} | |||
|[[File:Trackball pals.jpg|100px]] | |||
|- | |||
|Recreated | |||
|[[GAL16V8]] | |||
|U78 | |||
|[[02-11-01]] | |||
|Tested | |||
|[[DogP]] | |||
|[[DogP]] | |||
|{{PLD|Ataxx_u78.zip}} | |||
|[[File:Trackball pals.jpg|100px]] | |||
|} | |||
<pre> | |||
Note: To use the trackball PALs on Ataxx, the Ataxx edge connector pin 'Y' must NOT be connected to GND, at least when using the newer ROM revision(s). | |||
The factory JAMMA adapter likely has this pin connected to GND for use with the joystick PALs. | |||
</pre> | |||
[[Category:Arcade]] | [[Category:Arcade]] | ||
Line 150: | Line 236: | ||
[[Category:1990]] | [[Category:1990]] | ||
[[Category:Undumped]] | [[Category:Undumped]] | ||
[[Category:DogP]] | |||
[[Category:Sorin C.]] |
Latest revision as of 09:46, 2 March 2025
PCB
edit-
Factory JAMMA adapter
-
PCB
PLD's
editCommon
editPLD Information | Credits | Download | View | |||||
---|---|---|---|---|---|---|---|---|
Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
Undumped | U72 | 02-01-02 | ![]() | |||||
Undumped | U71 | 02-02-01 | ![]() | |||||
Undumped | U85 | 02-03-01 | ![]() | |||||
Undumped | U90 | 02-12-01 | ![]() | |||||
Bruteforced | GAL16V8 | U68 | 02-13-01 | Tested | DogP | DogP | ZIP | ![]() |
Undumped | U39 | 02-15-01 | ![]() | |||||
Undumped | U40 | 02-16-01 | ![]() | |||||
Undumped | U67 | 02-20-01 | ![]() | |||||
Bruteforced | GAL16V8 | U91 | 02-21-01 | Tested | DogP | DogP | ZIP | ![]() |
Undumped | U106 | 02-22-01 | ![]() | |||||
Undumped | U6 | 02-23-01 | ![]() |
Factory JAMMA Adapter
editPLD Information | Credits | Download | View | |||||
---|---|---|---|---|---|---|---|---|
Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
Recreated | GAL16V8 | U3 | 02-28-01 | Tested | DogP | DogP | ZIP |
Joystick Version
editPLD Information | Credits | Download | View | |||||
---|---|---|---|---|---|---|---|---|
Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
Bruteforced | GAL16V8 | U75 | 02-24-01 | Tested | DogP | DogP | ZIP | ![]() |
Bruteforced | GAL16V8 | U76 | 02-25-01 | Tested | DogP | DogP | ZIP | ![]() |
Bruteforced | GAL16V8 | U77 | 02-26-01 | Tested | DogP | DogP | ZIP | ![]() |
Bruteforced | GAL16V8 | U78 | 02-27-01 | Tested | DogP | DogP | ZIP | ![]() |
Note: To use the joystick PALs on Ataxx, the ROM must support it (Rev 5 does, Rev 1 doesn't, others are untested), and the Ataxx edge connector pin 'Y' must be connected to GND. DogP has confirmed the factory JAMMA adapter has this pin connected to GND via a 0 ohm resistor (see picture)
Trackball Version
editPLD Information | Credits | Download | View | |||||
---|---|---|---|---|---|---|---|---|
Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
Recreated | GAL16V8 | U75 | 02-08-01 | Tested | DogP | DogP | ZIP | ![]() |
Recreated | GAL16V8 | U76 | 02-09-01 | Tested | DogP | DogP | ZIP | ![]() |
Recreated | GAL16V8 | U77 | 02-10-01 | Tested | DogP | DogP | ZIP | ![]() |
Recreated | GAL16V8 | U78 | 02-11-01 | Tested | DogP | DogP | ZIP | ![]() |
Note: To use the trackball PALs on Ataxx, the Ataxx edge connector pin 'Y' must NOT be connected to GND, at least when using the newer ROM revision(s). The factory JAMMA adapter likely has this pin connected to GND for use with the joystick PALs.