Ninja Baseball Batman (Korean version)
From
PCB
Pictures from Porchy
PLD's
| PLD Information | Credits | Download | Pictures | |||||
|---|---|---|---|---|---|---|---|---|
| Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | View |
| Bruteforced | GAL16V8 | IC11
3M |
M92-A-3M- | Tested | Zabanitu | Zabanitu | JEDEC | |
| Bruteforced | GAL16V8 | IC41
7J |
M92-A-7J- | Tested | Zabanitu | Zabanitu | JEDEC | |
| Bruteforced | GAL16V8 | IC51
9J |
M92-A-9J- | Tested | Zabanitu | Zabanitu | JEDEC | |
| Bruteforced | GAL16V8 | IC51
2A |
Tested | Porchy | Porchy | JEDEC | ||
| Bruteforced | GAL16V8 | IC7
2L |
M92-B-2L- | Tested | Zabanitu | Zabanitu | JEDEC | |
| Bruteforced | GAL16V8 | IC47
7H |
M92-B-7H-D | Tested | Caius | Caius | JEDEC | |
On the Korean board version there is a PAL on the ROM board at location 2A (IC51). It has one output connected to the "N" jumper which isnt selected on this board and also only needs to be tied either HIGH or LOW. I dont believe this PAL is required but it is included for completeness.
