Difference between revisions of "Money Money"
From
(→PLD's) |
(→PLD's) |
||
| Line 8: | Line 8: | ||
|- | |- | ||
|Bruteforced | |Bruteforced | ||
|GAL16V8 | |[[GAL16V8]] | ||
|6J (lower PCB) | |6J (lower PCB) | ||
| | | | ||
|Tested | |Tested | ||
|Caius | |[[Caius]] | ||
|Caius | |[[Caius]] | ||
|[https://wiki.pldarchive.co.uk/pals/MoneyMoney_IC6J.jed JEDEC] | |[https://wiki.pldarchive.co.uk/pals/MoneyMoney_IC6J.jed JEDEC] | ||
| | | | ||
|- | |- | ||
|Bruteforced | |Bruteforced | ||
|GAL16V8 | |[[GAL16V8]] | ||
|6K (lower PCB) | |6K (lower PCB) | ||
| | | | ||
|Tested | |Tested | ||
|Caius | |[[Caius]] | ||
|Caius | |[[Caius]] | ||
|[https://wiki.pldarchive.co.uk/pals/MoneyMoney_IC6K.jed JEDEC] | |[https://wiki.pldarchive.co.uk/pals/MoneyMoney_IC6K.jed JEDEC] | ||
| | | | ||
|- | |- | ||
|Modified | |Modified | ||
|GAL22V10 | |[[GAL22V10]] | ||
|A1 (upper PCB) | |A1 (upper PCB) | ||
| | | | ||
|Tested | |Tested | ||
|Caius | |[[Caius]] | ||
|Caius | |[[Caius]] | ||
|[https://wiki.pldarchive.co.uk/pals/MoneyMoney_1A.jed JEDEC] | |[https://wiki.pldarchive.co.uk/pals/MoneyMoney_1A.jed JEDEC] | ||
| | | | ||
Revision as of 19:53, 20 June 2022
PCB
PLD's
| PLD Information | Credits | Download | View | |||||
|---|---|---|---|---|---|---|---|---|
| Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
| Bruteforced | GAL16V8 | 6J (lower PCB) | Tested | Caius | Caius | JEDEC | ||
| Bruteforced | GAL16V8 | 6K (lower PCB) | Tested | Caius | Caius | JEDEC | ||
| Modified | GAL22V10 | A1 (upper PCB) | Tested | Caius | Caius | JEDEC | ||
For A1, tie pin 10 to 12 when install chip in socket. Original device was a PAL16L8 but unable to fit equations into device
