Difference between revisions of "Blandia"
From
(→PLD's) |
(→Note) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
== PLD's == | == PLD's == | ||
{{PLD_ALL}} | {{PLD_ALL}} | ||
|- | |||
|Bruteforced | |||
|[[GAL16V8]] | |||
|U206 | |||
|UX-015 | |||
|Tested | |||
|[[Yves_M]] | |||
|[[Yves_M]] | |||
|[https://wiki.pldarchive.co.uk/pals/Blandia_UX-015_U206.zip ZIP] | |||
| | |||
|- | |- | ||
|Bruteforced | |Bruteforced | ||
| Line 14: | Line 24: | ||
|Bruteforced | |Bruteforced | ||
|[[GAL16V8]] | |[[GAL16V8]] | ||
| | |U14 | ||
|UX- | |UX-017 | ||
|Tested | |Tested | ||
|[[Yves_M]] | |[[Yves_M]] | ||
|[[Yves_M]] | |[[Yves_M]] | ||
|[https://wiki.pldarchive.co.uk/pals/Blandia_UX- | |[https://wiki.pldarchive.co.uk/pals/Blandia_UX-017_U14.zip ZIP] | ||
| | |[[File:Blandia-UX-016 U116.jpg|100px]] | ||
|- | |- | ||
|Bruteforced | |Bruteforced | ||
| Line 34: | Line 44: | ||
|Bruteforced | |Bruteforced | ||
|[[GAL16V8]] | |[[GAL16V8]] | ||
| | |U36 | ||
|UX- | |UX-019 | ||
|Tested | |Tested | ||
|[[Yves_M]] | |[[Yves_M]] | ||
|[[Yves_M]] | |[[Yves_M]] | ||
|[https://wiki.pldarchive.co.uk/pals/Blandia_UX- | |[https://wiki.pldarchive.co.uk/pals/Blandia_UX-019_U36.zip ZIP] | ||
| | | | ||
|- | |- | ||
| Line 50: | Line 60: | ||
|[[Yves_M]] | |[[Yves_M]] | ||
|[https://wiki.pldarchive.co.uk/pals/Blandia_UX-020_U76.zip ZIP] | |[https://wiki.pldarchive.co.uk/pals/Blandia_UX-020_U76.zip ZIP] | ||
| | | | ||
|} | |} | ||
| Line 67: | Line 67: | ||
UX-016 - There is a factory made modification on this (3 cut tracks replaced by one wire at pin #19 and two resistors at pins #16 and #17). Also, pin #16 is lifted and not soldered on the board. See attached picture. | UX-016 - There is a factory made modification on this (3 cut tracks replaced by one wire at pin #19 and two resistors at pins #16 and #17). Also, pin #16 is lifted and not soldered on the board. See attached picture. | ||
</pre> | </pre> | ||
[[Category:Arcade]] | |||
[[Category:Allumer]] | |||
Latest revision as of 23:25, 23 July 2022
PLD's[edit]
| PLD Information | Credits | Download | View | |||||
|---|---|---|---|---|---|---|---|---|
| Dump Method | Target Device | Location | ID | Status | Creator(s) | Tester(s) | Files | Pictures |
| Bruteforced | GAL16V8 | U206 | UX-015 | Tested | Yves_M | Yves_M | ZIP | |
| Bruteforced | GAL16V8 | U116 | UX-016 | Tested | Yves_M | Yves_M | ZIP | 
|
| Bruteforced | GAL16V8 | U14 | UX-017 | Tested | Yves_M | Yves_M | ZIP |
|
| Bruteforced | GAL16V8 | U35 | UX-018 | Tested | Yves_M | Yves_M | ZIP | |
| Bruteforced | GAL16V8 | U36 | UX-019 | Tested | Yves_M | Yves_M | ZIP | |
| Bruteforced | GAL16V8 | U76 | UX-020 | Tested | Yves_M | Yves_M | ZIP | |
Note[edit]
UX-016 - There is a factory made modification on this (3 cut tracks replaced by one wire at pin #19 and two resistors at pins #16 and #17). Also, pin #16 is lifted and not soldered on the board. See attached picture.
